1200-2200硬紙板生產線
發布時間：2017-05-24 14:59:37
功能特點： 硬紙板生產線適用于將2-4層的300-600g/米2進行復合。主要由承紙架、過橋輸送機、涂膠機、壓實 機、（平板式）烘干部、冷卻部、分紙牽引機、電腦橫切機、堆碼機等組成，具有生產工藝先進、操作維 修方便、安全可靠、節約能源、無環境污染等特點〇生產線采用卷筒紙復合，幅寬有1200mm~2200mm等 規格供您選擇，可將三張、四張原紙進行復合，定量2000g/m2、厚度3.5mm、產量35T-80T/d,該線生產 出的紙板厚度、緊度、水份、平滑度、挺度、抗張強度均達到進口的同類產品，完全可以替代進口的超厚 硬紙板，該產品適用于煙箱、酒箱、箱包、食品箱、精裝書皮、高檔禮品盒、文具用品等。該生產線彌補了 單機手工裱糊的多項缺點，大幅度降低了生產成本、提高了產品質量、經濟效益可觀，是您制作硬紙板及 硬紙板箱的理想設備。
The carton board production line applys to laminating 2-4 ply materia! weight of 300-600g/ m2〇 The machine is composed mainly of stand, bridge conveyor, gluer, compactor press,(platform) dryer, cooler, thin blade slitter scorer, CNC cutting machine and stacker. With characteristics of advanced production engineering, easy operation and maintenance,safe and steady, energy saving and environment friendly. Size 1200mm~2200mm are optional, quantified 2000g/m2, thickness 3.5mm, through put 35T-80T/D. The the thickness, tightness, moisture content, smoothness, stiffness and tensile strength can reach the standard of the imported products. Which can eventually replace the imported corrugated board, which suit for the cigarette box, wine box, food box, hard book cover, High-end gift box and stationery. The production line makes up for many defects of the manual laminator,greatly reduced the cost of production, improved the quality of production, increased the economic efficiency. It is your ideal choice to product corrugated board and carton boxes.
 |
SY型四層預熱器 SY type 4 ply pre-heater ♦預熱器可根據紙板干濕程度加熱調整石英管溫度，增加紙張 平整度。 ♦熱輥的表面經過磨削并鍍硬鉻，熱輥表面的溫度均勻一致， 使其達到原紙在進入涂膠機前的溫度基本一致。 ♦ The temperature of quartz tube of pre-heater can be adjusted according to the moisture content of paper, increasing the smoothness of the paper. ♦ The heating roller is surface grinded and chrome covered, making even heating of the paper before it goes into the gluing machine. |
 |
SD型對邊機
SD type Alignment machine
♦該對邊機有四層，每層有機架、導紙輥、糾偏器，汽油壓控 制自動對邊、對齊、自動校正紙張。
♦有效的保證紙張在涂膠時紙邊對齊，減少紙張廢品，提高生 產效率。
♦ This machine has 4 levels that each has stand, guiding roll, corrector, automatic oil pressure control aligning and automatic correcting of paper.
♦ It can guarantee the alignment of paper during gluing, reduce the waste products and increasing the production efficiency.
|
 |
ST型三層涂膠機
ST type 3 ply gluing machine
♦涂膠機起到給原紙涂腔的作用。
♦每層涂腔單獨傳動，變頻控制，保證上膠輥的線速與雙靣機同步。 ♦勻膠輯表面經精磨、壓網、鍍鉻處理，。
♦涂腔輥為軟膠輥，且M邊有調整裝置，使其涂腔均勻。壓紙輯妥用氣 動裝置，操作更方便。
♦ The gluing machine is to glue on the material paper.
♦ Each gluing is independent driven, frequency controlled to guarantee the gluing roller keep the same speed to the double facer.
♦ the anilox gluing roller is surface grinded and chrome covered.
♦ The rubber gluing roll can be adjusted to make even gluing.
The guiding roll is pneumaticly control, convenience for operation.
|
 |
YS-QD壓實機
YS-QD Compacting machine
壓實部是硬紙板生產線的一個重要組成部分，它 的主要用途是上輥和下輥將原紙和面紙壓合成所需的 多層紙板。
The compacting machine is one of the important parts of carton board production line. It use the upper roll and lower roll to press the base paper and face paper to be multilevel carton board.
|
 |
FZ-DY分紙機
FZ-DY Slitting machine
分紙機是硬紙板生產線的重要組成部分，它的主要 特點是將復合好的硬紙板進行縱切，刀片采用好9crsi 合成，刀鋒鋒利，使用壽命長，整機電動左右糾偏，有 效配合紙幅偏移。
The slitting machine is one of the important parts of carton board production line. It cuts the carton board in length way s.the cutting blade adopts 9CrSi alloy steel, with characteristic of sharp edge and long use time, the machine is electrically correct a error which can match with the shifting of carton board.
|
 |
單刀切紙機 single-blade paper cutter ♦合理的機械結構，剛性強、穩定性好、使用壽命長； ♦所有操作控制在同一側靣，操作方便，光電計數； ♦橫切長度400-的99mm; ♦切紙精度± 1mm。 ♦ Rational mechanical structure, strong form, good stability, have long performance life. ♦ All operation control on the same side, easy to operate, with photoelectricity counter. ♦ crosscut 400mm-9999mm. ♦ Cut paper precision ± 1 mm. |